If you’re a dirt bike rider, you know the importance of protecting your bike’s radiator from damage. Rocks, sticks, and other debris can easily puncture or bend the fragile fins of the radiator. That’s why investing in high-quality radiator protection is generally a good idea.
In this article, I will provide a comprehensive review of Enduro Engineering radiator guards. I will cover key features, installation process, and performance details after a trail test.
In this post, you will find:
Introduction
Enduro Engineering is a reputable brand in the off-road industry, offering a range of high-quality parts and accessories for dirt bikes. Their strong, yet light weight aluminum braces are specially designed to provide maximum protection for your radiator without sacrificing airflow.
Next, let’s dive into this hands-on Enduro Engineering radiator braces review.
Installation
The installation process is relatively straightforward and can be accomplished by anyone with basic mechanical skills. Each guard comes with a set of instructions that are easy to follow and understand. The guards attach to the existing mounting points on your dirt bike’s radiator. All necessary hardware is included in the package.
The installation process is simple and should take less than 10 minutes. Basically, you will only need a socket set or similar to properly install the guards. And, once installed, the guards offer a snug fit and will not rattle or vibrate during use.
Overall, the installation process is easy and hassle-free, making it a great option for riders who want to add an extra layer of protection to their dirt bikes.
Protection and Fitment
One of the main benefits is the increased protection they provide against rocks, stick, mud, and other debris of your dirt bike’s radiator.
Another common damage is direct side impact damage to the radiator. Also, this usually happens by dropping the dirt bike over on either of its sides. Additionally, this direct side hit will typically twist or push the radiator inwards and bending the outer side of the radiator causing coolant leaks. However, these guards will prevent damage in all these above mentioned scenarios.
The only concern I have with the fitment, is on the left side radiator. The lower flap is about quarter of an inch away from hitting the 2 stroke pipe. I wonder how this will work when I eventually bend the pipe inwards or upwards. Remains to be seen.
The outer sides extend to cover the radiator very well. They also fit closely to the radiator and leave the inside open. This means you can install a dirt bike radiator fan with brackets on the right side radiator.
In our testing, we found that these radiator braces held up extremely well against rocks and debris on the trails. Meanwhile, even after multiple impacts, the guards showed no signs of bending or cracking, and the radiator remained completely protected.
Overall, these guards offer outstanding protection and durability, making them a great investment for any dirt bike rider.
Durability and Performance
One of the concerns riders often have with braces is that they may reduce the airflow to the radiator. Poor airflow could potentially lead to overheating and reduced engine performance. However, they are designed to allow for maximum airflow while still providing complete protection for your radiator.
In our testing, we found that using these guards did not have any noticeable effect on the cooling of our dirt bike. The bike ran smoothly and did not experience any overheating issues, even during long rides in hot weather.
Overall, the radiator braces provide excellent protection for your radiator without sacrificing performance or airflow, making them a great choice for riders who want the best of both worlds.
Style and Aesthetics
In addition to providing top-notch protection and performance, they also add a touch of style to your dirt bike.
The guards are available in aluminum or black to match your bike’s color scheme. Their sleek and minimalist design gives your bike a clean and modern look.
I like the thick aluminum look and fit. The guards seem like factory made and in my mind makes the dirt bike better looking. They also fit into Acerbis aftermarket plastics kit, which is a plus.
Enduro Engineering Radiator Guards – Review Summary
This section contains affiliate links. If you use these links to buy something we may earn a commission at no additional cost to you. As an Amazon Affiliate we earn from qualifying purchases.
Overall, these sturdy aluminum guards are strong, easy to install and look great! I like the added protection from side impact and how snug they fit around the radiator. They also leave space for the factory radiator fan.
These braces are a must-have accessory for any serious off-road or enduro rider and in my book are the best dirt bike radiator braces.
These guards are designed to protect the radiator from damage due to rocks, debris, and other hazards that can occur on the trail. Made from high-quality materials, the aluminum radiator braces offer superior durability and protection, giving riders peace of mind and allowing them to focus on the ride.
Feature | Overall 4.4/5 |
---|---|
Installation | |
Protection | |
Performance | |
Durability | |
Price |
Frequently Asked Questions
Do you really need a radiator guard?
Yes, however it depends on the riding style and trails you ride. If you ride muddy, rocky or extreme trails where debris and dirt is flying around, radiator guars will protect the radiators well. They also protect the radiators from direct side impact damage. Stock plastic guards do well with mud/dirt only but not with rocks or when dropping the dirt bike on its side.
How do you install Enduro Engineering radiator braces?
1. Remove old radiator braces.
2. Clean the radiators from dirt and debris.
3. Mount the new braces.
4. Secure the outer side to the dirt bike plastics with the screws that mount to the existing guard mounting points.
5. Secure the inside to the dirt bike frame using the bolts from the package.
What are radiator guards for?
They protect the radiator from direct impact damage and also from flying debris, such as mud, rock, sticks, and similar. The radiator has small fins, that if bent cause poor cooling performance and that’s why you should consider protecting the radiator with guards.
Final Thoughts
Radiator braces are an essential accessory for any dirt bike enthusiast. They provide top-notch protection for your bike’s radiator, ensuring that it stays safe from rocks, debris, and other hazards on the trails. The guards are made from high-quality materials and are built to last, providing excellent durability and performance in even the most extreme off-road conditions.
In addition to their impressive protective capabilities, the radiator braces also offer a range of style and customization options. With their sleek and modern design, the guards add a touch of style to your dirt bike, and their available range of colors allows you to match your bike’s color scheme perfectly.
If you’re serious about protecting your dirt bike and enhancing its style and performance, these aluminum guards are the way to go.
Keep them fins pointing forward!
Read next: