The short answer
The 2023 KTM 300 XC-W is my own trail and hard enduro bike. It makes about 57 hp, weighs 228 lb (103.4 kg) without fuel, and the TPI engine with a wide-ratio 6-speed is smooth, linear and almost impossible to stall. Stock, the soft XPLOR fork and Dunlop tires hold it back; with Race Tech suspension and gummy tires it’s a different bike. The 2024 model got a new TBI engine (49 hp), a closed-cartridge XACT fork and a new frame, and weighs 231 lb.

Most KTM 300 reviews are written after a press launch or a single test day. This one is from the owner’s seat. I bought a 2023 KTM 300 XC-W to replace my 2018 KTM 300, and it’s been my main trail and hard enduro bike since.
Below: how the engine and suspension work on real single track, what I changed and why, the full 2023 specs, and what KTM changed for 2024, so you can decide which year to buy.
Why I bought the 2023 and how I ride it
The 300 XC-W won my best trail dirt bike comparison, so it was the obvious replacement for my 2018. I ride it mostly on single track around Texas: rock, roots, steep climbs and tight woods, with trips to New Mexico, Colorado and Utah.
When I first wrote about it, I had owned it for about six months and put roughly 40 hours on it across several Texas single tracks. The bike has just under 100 hours on it.
The 2023 was a light update. KTM gave the XC-W new 90s-retro plastics with the graphics molded into the plastic, an orange frame and a plastic skid plate. The big changes went to the SX and XC models that year. Parts are mostly interchangeable with the 2021 and 2022 XC-W.

Engine and power delivery
The TPI engine is smooth, strong and very predictable. With the stock yellow power valve spring it feels mellow for a 300 and the power comes on linearly through the rev range, but it still has a hard punch when you ask for it. Compared with my 2018, it’s much less aggressive and easier to control.
- Off idle: slightly less low-end hit just off idle than the older 300. You get used to it quickly.
- Idle: the idle air screw fine-tunes idle speed and just-off-idle response. To go further, a custom fuel mixture screw on the throttle body changes the off-idle mixture for more low-end torque.
- Power valve: you can still tune it yourself, but the 2023 no longer comes with the spare power valve springs. Buy them aftermarket.
- Fuel: TPI meters the oil for you, so you don’t mix 2-stroke fuel.
After break-in I planned to swap the yellow spring for a red one to bring back some of the snap. I made the swap to the red spring and the bike pulls harder in the midrange without losing the smooth bottom end.
Gearing and trail manners
The wide-ratio gearbox is made for single track. First gear is short, second is manageable at very slow speed and will take you up the steepest climbs without stalling. The 300 engine just doesn’t stall, which is what you want in rock gardens and on technical climbs.
The forward controls feel right. The stock handlebar felt too wide for me in tight woods. I cut the bars to about 760 mm (29.9 in) for single track. My handlebar setup guide covers how to pick the width.
Suspension: the stock weak spot
The 2023 XC-W runs a 48 mm WP XPLOR fork and the linkless PDS rear shock. The fork has a spring preload adjuster, which is useful. The shock has rebound plus low- and high-speed compression adjustment and felt plush and able to keep up on faster trail.
The fork was the problem. Stock, it’s soft, with poor bottoming resistance and high-speed stability. The first thing I did was install Race Tech Gold Valves in the fork. Today the bike runs a full Race Tech racer setup for my 170 lb (77 kg) weight. With the Race Tech setup the front holds up in braking bumps and fast rock sections, and I no longer bottom it on hard hits.

If you keep the stock suspension, start by setting sag and clickers for your weight; my suspension setup guide walks through it.
What I changed on my bike
| Part | Stock 2023 | My bike now | Why |
|---|---|---|---|
| Fork and shock | WP XPLOR fork, PDS shock, stock valving | Race Tech, racer setup for a 170 lb rider (started with Gold Valves in the fork) | Stock fork is soft and bottoms |
| Front tire | Dunlop MX33 | Shinko MX216 | Stock tires aren’t sticky enough for rock and roots |
| Rear tire | Dunlop AT81, 110/100-18 (the frame fits up to a 140-wide rear) | IRC VE33S | Gummy rear for rock; see my VE33S 100-mile test |
| Skid plate | Plastic | Enduro Engineering Xtreme (aluminum) | The stock plate isn’t durable |
| Plastics | Stock 2023 retro kit | Acerbis 2023 XC-W kit with a 2022 XC front plate, OMX graphics | Custom look: an OMX design with a few of my own logos |
More detail on the protection and tires: dirt bike skid plates and best trail tires.
Long-term: reliability and running costs
Durability, reliability and ease of service were on my pros list from the start, and the 300 is simple to work on. So far the bike has needed only routine maintenance: oil, air filter, plugs, chain and tires, with no engine or TPI problems. I replace the transmission oil every 20 hours and plan a top end at about 150 hours.

2023 KTM 300 XC-W specs
| Specification | 2023 KTM 300 XC-W |
|---|---|
| MSRP (US, at launch) | $11,099 |
| Engine | Single-cylinder, 2-stroke, liquid-cooled |
| Displacement | 293.2 cc |
| Bore/stroke | 72/72 mm |
| Power | About 57 hp |
| Starter | Electric |
| Transmission | 6-speed, wide ratio |
| Fuel system | Dell’Orto 39 mm throttle body, TPI |
| Front suspension | WP XPLOR USD, 48 mm |
| Rear suspension | WP XPLOR PDS |
| Brakes | Disc, 2-piston caliper front; disc, 1-piston caliper rear |
| Tires | 90/90-21 front, 110/100-18 rear |
| Wheelbase | 1,485 ± 10 mm (58.5 in) |
| Ground clearance | 370 mm (14.6 in) |
| Seat height | 960 mm (37.8 in) |
| Fuel tank | 9 L (2.38 gal) |
| Weight without fuel | 228 lb (103.4 kg) |
Pros, cons and scores
| Pros | Cons |
|---|---|
| Smooth, strong, predictable engine | Stock tires |
| TPI: no premixing | Soft stock fork |
| Wide-ratio gearbox, very hard to stall | Stock plastic skid plate isn’t durable |
| PDS shock: simple, plush, linkless | Patented plastics make aftermarket kits harder to find |
| Durable, reliable, easy to service | Pricey |
| Category | Score (out of 5) |
|---|---|
| Performance | 5 |
| Suspension (stock) | 4 |
| Trail-worthiness | 5 |
| Handling | 4 |
| Price | 4 |
| Overall | 4.4 |

What changed for 2024
For 2024 KTM overhauled the XC-W: new engine with throttle body injection, new frame and subframe, new fork, updated shock and new bodywork. The 2024 came in at $11,449 at launch. Here’s how it compares on paper.
| Specification | 2023 300 XC-W | 2024 300 XC-W |
|---|---|---|
| MSRP (US, at launch) | $11,099 | $11,449 |
| Power | 57 hp | 49 hp |
| Torque | n/a | 43.8 Nm (32.3 lb-ft) |
| Displacement / bore × stroke | 293.2 cc / 72 × 72 mm | 293.2 cc / 72 × 72 mm |
| Fuel system | TPI, Dell’Orto 39 mm throttle body | TBI, 39 mm throttle body |
| Starter | Electric | Electric; kickstarter can’t be retrofitted |
| Fork | WP XPLOR, 48 mm, open cartridge | WP XACT, 48 mm, closed cartridge |
| Shock | WP XPLOR PDS | WP XPLOR PDS, redesigned, hand clickers |
| Front tire | 90/90-21 | 80/100-21 |
| Wheelbase | 1,485 ± 10 mm | 1,488 ± 10 mm |
| Ground clearance | 370 mm | 373 mm |
| Seat height | 960 mm (37.8 in) | 963 mm (37.9 in) |
| Fuel tank | 9 L (2.38 gal) | 9 L (2.37 gal) |
| Weight without fuel | 228 lb (103.4 kg) | 231 lb (104.8 kg) |

Engine: TBI and less peak power
The 2024 engine is completely redesigned and makes 49 hp and 43.8 Nm, less than the 2023’s 57 hp. That’s on purpose: a hard enduro bike needs smooth, steady torque more than peak power. It makes the 2023 the last of the high-output TPI 300s.
- TBI: fuel is injected at the 39 mm throttle body instead of the transfer ports. The ECU reads water and air temperature, ambient and crankcase pressure, rpm and throttle position. KTM developed the throttle body and ECU with Keihin.
- Electric power valve: the EMS positions the power valve from rpm and throttle position and calibrates itself, so there are no springs to swap.
- Map switch: an optional switch selects map 1 (mellow, linear) or map 2 (sharper, more aggressive).
- Reed valve: plastic flaps on the reed case improve intake sealing, which stops over-fueling and bogging on steep up- and downhills.
- Exhaust: a more compact header improves ground clearance.
Suspension: XACT closed-cartridge fork
The biggest change for a trail rider is the fork. The 2024 uses a 48 mm WP XACT closed-cartridge spring fork with a new mid-valve piston, a hydro stop in the last 68 mm of travel and hand-adjustable clickers. Fork length grew from 928 to 940 mm and stroke from 292 to 300 mm. The PDS shock is shorter (415 to 402.7 mm overall, 105 to 102.7 mm stroke), about 380 g lighter, and gets hand clickers for compression (top) and rebound (bottom).
On the 2023, fixing the XPLOR fork was my first job. The XACT fork should close much of that gap stock. I haven’t ridden a 2024 back to back with my bike, so I can’t yet say if it matches my Race Tech setup.

Chassis, bodywork and electrics
- Frame: reworked for stability and anti-squat, thicker walls in high-stress areas, new shock mount, footpeg mounts moved inward to reduce hooking in ruts.
- Subframe: 2-piece, cast aluminum lower and polyamide upper, 4 lb (1.8 kg), with the electronics built in.
- Swingarm: new hollow die-cast aluminum, about 190 g lighter, with visible chain adjustment marks.
- Cockpit: forged triple clamps with a high-flex stem, tapered Neken bars.
- Bodywork: new rider triangle and knee contact, flatter seat with a high-grip cover, a lift handle under the seat, front fender with mud fins.
- Tank and airbox: new translucent tank with a threaded cap; tool-free air filter access from the left side panel; sealed airbox.
- Electrics: Li-ion 2.0 Ah battery about 2.2 lb (1 kg) lighter than lead-acid, LED headlight, an Offroad Control Unit (OCU) instead of fuses and relays, and a rollover sensor.

2023 or 2024: which should you buy?
I consider 2021–2023 the best years for the KTM 300: modern, widely available and strong. Buy a 2023 (or a 2021–2022) if you want the hardest-hitting TPI 300, simpler electronics and lower used prices, and budget for suspension work. Buy a 2024 or newer if you want a better fork out of the box, TBI, the map switch and the new chassis, and you don’t mind less peak power. For hard enduro on a budget I’d still take a 2023 with revalved suspension over a stock 2024.
Hard enduro setup
Suspension, tires and protection are the first three upgrades on this bike; the hard enduro path covers them in order.
FAQ
How much horsepower does the 2023 KTM 300 XC-W have?
About 57 hp. The redesigned 2024 TBI engine makes 49 hp and 43.8 Nm, tuned for smoother torque rather than peak power.
How much does a 2023 KTM 300 XC-W weigh?
228 lb (103.4 kg) without fuel. The 2024 is 231 lb (104.8 kg). The tank holds about 9 L (2.38 gal).
What is the top speed of a KTM 300 XC-W?
The wide-ratio gearbox is built for trail, not top speed, and sprocket and tire changes move it a lot.
Do you have to mix gas in a 2023 KTM 300 XC-W?
No. TPI injects 2-stroke oil from a separate tank as you ride, so you run straight gas. The 2024 TBI model works the same way.
What changed on the 2024 KTM 300 XC-W?
A new TBI engine with an electric power valve, a closed-cartridge WP XACT fork, a redesigned PDS shock with hand clickers, a new frame, subframe and swingarm, new bodywork, a Li-ion battery and an LED headlight.