Level 03

Hard Enduro dirt bike setup

For riders who already ride well and want a bike that survives rocks, roots and race day. Three steps, in the order I do them.

Rider splashing through mud on an enduro race course
1

Maintenance

A DNF is usually a loose bolt or a worn bearing. Find it in the garage, not on the hill.

  1. Inspect all controls and their functions (write-up coming)
  2. Check the wheel and main bearings for play
  3. Inspect and tune the suspension
  4. Inspect engine and power delivery
  5. Choose your tire setup
2

Protection

Keep the bike running when it's on its side in a rock garden.

  1. Engine cooling and a radiator fan
  2. Handguards: how much protection
  3. Lift and pull straps (write-up coming)
3

Tuning & testing

Test the setup where you'll ride it. Change one thing at a time.

  1. Test your setup in similar conditions (write-up coming)
  2. Tune the bike and adjust the gearing (write-up coming)
  3. Strap tools and snacks to the bike (write-up coming)

Coming later · Hard Enduro Setup Guide (PDF)

The Beginner guide comes first.

Read the hard enduro steps above for free while the full guide is being written.

Start with Beginner